REDGUM ‘Audio Pipeline’ OFC RCA Interconnect 1m
The Design:
The REDGUM RGAP ‘Audio Pipeline’ OFC RCA interconnect cables are researched, developed, designed and manufactured in conjunction with some of the most knowledgeable specialists in the industry. Designed to provide focus and sound staging, with a strong sense of three-dimensionality, resolution and detail.
Take a listen and prepare to be amazed!
“Audio Pipeline” – the name that has been trusted since 2003 as it makes all the right connections between our products! (And yours, too!)
Available in lengths of 0.5m, 1m, 1.5m and 2m.
The Construction of RGAP RCA Interconnects:
The Centre (signal) conductor comprises of a bundle of 80 cores of 0.09mm Oxygen-Free Copper (OFC) conductor, lightly twisted, and encased in a special foamed polyethylene insulating jacket.
Both channels are then individually screened to a low-noise specification with a 12-section x 9-strand spc braided OFC sheath, designed to achieve excellent RF rejection, very low capacitance and a low noise floor.
The final outer covering is a matte blue jacket with silver printing. The cable is terminated with gold-plated RCA connectors, which feature an easy grip, ergonomically designed barrel, a Teflon insulator, and matching matte blue jacket.
The Result:
The REDGUM RGAP ‘Audio Pipeline’ OFC RCA interconnect accurately extracts the maximum available information from a recording without ever erring towards artifice or over-emphasis. The Low Capacitance results in less high frequency attenuation and distortion.
What you get is a cable capable of clarity and signal integrity even over very long distances. Reproduction spans a broad and unencumbered frequency range with smooth, effortless and seamless integration from very low to very high frequencies, without introducing any unnatural peaks or troughs.
The Technicals:
These are real-world measurements of the totally-finished cable (i.e. including the gold RCA plug terminations):
| Model | Length | Resistance | Inductance | Capacitance |
| RGAP 05 | 0.5m | 0.04ohm | 0.09uH @200kHz | 55.7pF @200kHz |
| RGAP 1 | 1m | 0.08 ohm | 0.18uH @200kHz | 82.3pF @200kHz |
| RGAP 15 | 1.5m | 0.12 ohm | 0.27uH @200kHz | 108.9pF @200kHz |
| RGAP 2 | 2m | 0.16 ohm | 0.36uH @200kHz | 135.5pF @200kHz |
The short Technical version:
Is it a good interconnect? – Yes, it is!
| Weight | 0.14 kg |
|---|---|
| Dimensions | 24 × 17 × 2 cm |
| PRODUCT DIMENSIONS | 1 m |
| OHMS | 0.08 Ω |
| INDUCTANCE | 0.18uH @200kHz |
| CAPACITANCE | 82.3pF @200kHz |
| OTHER | Teflon-insulated gold-plated RCAs |
Related Products
REDGUM RGS Manna
First presented as the RGS28i, these are the little speakers that stunned them in England, even back in 1998. In fact, spontaneous ovations during Shows have been known to break out after their performance! Continuing as a 2-way, 2 driver system, they were re-designed internally as the RGSB Bookshelf Loudspeaker (christened Manna*) … using exclusively high-voltage metallized polypropylene caps … heavy 1mm wire for the bass coil … all connections silver soldered … and internal hook-up throughout with 12 AWG OFC copper. Handcrafted in Australia, they are not just a stunning looker with their gloss finish over real Red Gum wood veneer, but as well they amaze all who listen to them!
REDGUM RGiHF Headphone Amplifier
For that “up close and personal” experience – the REDGUM RGHF Headphone Amplifier is based on our RGi35 circuit design with substantial adaptation to the power supply.
This amplifier has also been modified to limit background noise to unprecedented “inky black” levels. Of all applications, a Headphone amplifier makes optimal use of Dual Volume controls as offered here – the volume level to each ear is chosen and provided in absolute isolation via each channel. Sound, “made to measure”, just as your RGHF will be “built to measure” to suit your headphone’s sensitivity … “up close and personal” from the start of its life!!
REDGUM Splendens (Pre – Power) System
The more power it gives you, well, the more words fail us to describe the SPLENDENS! Except for the obvious >250W/ch (8Ω).
The clue is in its origins. Simply put, take the the RGM175 Monoblock System (175W/ch), upgrade it to the Signature Series RGM175ENR (200W/ch). And then let it quietly evolve over the years.
Having now morphed into the Splendens Monoblock Pre-Power System, it still brings together the the principles of the RG175p Dual Mono Volume Passive Preamp with two RG175ENRm Signature Series Monoblock Power Amplifiers. And then some.
So while you are finding the words for it in the music, watch out, too, for what the musicians are thinking as they play!!
REDGUM RGH900-1 5.1 Power Amplifier
150W (8Ω) x 6 Channel Home Theatre Power Amplifier
Originally released as the award-winning* RGH900, this Home Theatre amplifier remains the same in all things (other than now claiming to be the first of that model number, i.e. RGH900-1). It is designed for the audiophile, with sonics that ‘flatten’ the competition.
Still with its original power giving 6 channels of 150WRMS and all full frequency – from explosions to The Eagles, make those Home Theatre speakers jump to attention and return the magic to movie soundtracks!
*Reviewers’ Choice 2001, HomeTheaterSound
Made in Australia – truly!
(H 145 x W 420 x D 360mm – 16 kg – 7 yr Warranty)