REDGUM ‘Expressive-Line’ 7AWG Speaker Cable
10 square millimetres of Australian copper per conductor is aka 7AWG! At better than 1.8milliohm/meter, this cable must be one of the lowest resistance cables anywhere! (… unless you are considering our 5AWG Signature Series ‘Expressive Line’ Speaker Cable!)
Its 7AWG will allow your REDGUM amplifier to really show its stamina by ‘transmitting’ the 800 Damping Factor (of the 60Wpc Stellulata) directly to your speaker terminals.
One length of this cable will give better results than bi-wiring with a lot of high-profile brands!!!
10 square millimetres of Australian copper per conductor is aka 7AWG! At better than 1.8milliohm/meter, this cable must be one of the lowest resistance cables anywhere!
(… unless you are considering our 5AWG Signature Series ‘Expressive Line’ Speaker Cable!)
Its 7AWG will allow your REDGUM amplifier to really show its stamina by ‘transmitting’ the 800 Damping Factor (of the 60W/ch Stellulata) directly to your speaker terminals.
One length of this cable will give better results than bi-wiring with a lot of high-profile brands!!!
A distinctive result alongside its attractive red and black jacket.
Cut to order, you can mix-and-match your lengths as long as the total adds up to a half or full metre. (Due to its thickness, for a safe ‘drop’ to the floor we recommend a minimum length of 2.5m per side, but feel free to discuss this further.)
(And to complete the bare ends of each 7AWG cable core, check out our RGTerm Termination Service for each cable length.)
(Image: Note – latest Right-angled Banana plugs will be supplied with Termination.)
Weight | 1.5 kg |
---|---|
Dimensions | 34 × 26 × 5 cm |
WIRE GAUGE - single core | 7AWG |
ELECTRICAL RESISTANCE | 1.7mΩ/m |
CAPACITANCE | 82pF/m |
CURRENT RATING | 69 amp |