REDGUM Signature Series 5AWG ‘Expressive-Line’ Speaker Cable
To drill down into the core of your music,
you need the amp with core strength.
BUT
is all that core strength being passed on to the speakers?
The Core Promise of any Signature Series version of a REDGUM product is “More of the same” plus a big dash of “And then some!”. This translates into a truly chunky 5AWG for our Signature Series ‘Expressive Line’ cable, with its 16 square millimetres of Australian copper, per core!
More-than-just-a promise is held within each core, with a further reduction by one-third of its electrical resistance, down to a very low 1.2mΩ/m. Put another way in Tech-speak, this chunky twin-core cable is 342g/m of (511 x 0.2 x 2). Definitely a Hi-Damping Factor cable!
Mined, milled & made in Australia, let it be the making of your speakers!
To drill down into the core of your music, you need the amp with core strength.
BUT
is all that core strength being passed on to the speakers?
The Core Promise of any Signature Series version of a REDGUM product is “More of the same” plus a big dash of “And then some!”. This translates into a truly chunky 5AWG for our Signature Series ‘Expressive Line’ cable, with its 16 square millimetres of Australian copper, per core!
More-than-just-a promise is held within each core, with a further reduction by one-third of its electrical resistance, down to a very low 1.2mΩ/m. Put another way in Tech-speak, this chunky twin-core cable is 342g/m of (511 x 0.2 x 2). Definitely a Hi-Damping Factor cable!
Mined, milled & made in Australia, let it be the making of your speakers!
INTERNALS
Single Core Specifications:
(% relative to single core of 7AWG RGAEL ‘Expressive Line’ speaker cable)
Cross-sectional area (metal): 16mm²
Wire Gauge: 5AWG
Strand Diameter: 0.2mm
Strand Number: 511 ( +59%)
Nominal Outer Diameter: 7.3mm (inc 1mm insulation)
Mass: 171g/m ( +50%)
Electrical Resistance: 1.2mΩ/m ( -30%)
Capacitance: 26pF/m ( -68%)
Current rating: 92 amp ( +33%)
EXTERNALS
Jacket: subtle dark “wood”-toned braid
Banana Plug Connectors:
– right-angled (allowing weight of cable to hang vertically)
– 24k gold-plated (to maximise signal transfer)
– sawtooth state spring (for increased contact pressure)
– double-screw locking
Lengths:
– Standard lengths – pairs of 2.5m*/AUD1150 or 3m*/AUD1300
(Other lengths to order*, as paired or uneven lengths)
– mirror-image offset lengths of cores
(for safe insertion into Output & Input terminals; either or both ends, as preferred)
– colours of exposed cores at cable ends – mid-blue & black
Especially if you draw your music from a digital world, copper cable of this quality leads to a new way of understanding the term ‘data mining’!
Mined, milled & made in Australia.
So your speakers can dig deeper
… and really drill down into the music!
* N.B. For orders other than 2.5m length pair (AUD1150 inc GST),
please email sales@redgumaudio.com for your PayPal invoice.
(Thanks, as there is much to check with options of lengths, plugs, & offsets!)
| Weight | 2 kg |
|---|---|
| Dimensions | 40 × 31 × 5 cm |
| WIRE GAUGE - single core | 5AWG |
| ELECTRICAL RESISTANCE | 1.2mΩ/m |
| CAPACITANCE | 26pF/m |
| CURRENT RATING | 92 amp |
Related Products
REDGUM ‘Expressive-Line’ 7AWG Speaker Cable
10 square millimetres of Australian copper per conductor is aka 7AWG! At better than 1.8milliohm/meter, this cable must be one of the lowest resistance cables anywhere! (… unless you are considering our 5AWG Signature Series ‘Expressive Line’ Speaker Cable!)
Its 7AWG will allow your REDGUM amplifier to really show its stamina by ‘transmitting’ the 800 Damping Factor (of the 60Wpc Stellulata) directly to your speaker terminals.
One length of this cable will give better results than bi-wiring with a lot of high-profile brands!!!
REDGUM Splendens (Power Channel)
As much as we are convinced the SPLENDENS Power channel sounds best playing with its twin brother and sister (the Stereo Passive Preamp), feel free to create your own combinations for Stereo or Home Theatre outings.
When going solo, it is no wallflower. In fact, it can be quite outspoken once let off the leash. With the massive Damping Factor that all REDGUM amplifiers contain, its tight, clean bass is happy to form the pulse of any occasion.
REDGUM RGS Lucens
REDGUM’s original Floorstanders were released as the RGS38i in 1998 completing our 2 Channel system range. They were the ones that ‘froze’ the downstairs area of the Melbourne Home Entertainment show when we played the Chinese Drum track. The same speaker that had the light fittings rattling at the Melbourne Audio Club hall for the first time in the Club’s history! All good, very clean fun! Now in this era of “makeovers” they have evolved internally into the RGS Lucens Floorstanding Loudspeakers … maintaining the same “body build” but with the added muscle of drivers shielded with dual magnets and consultant-designed crossovers. The family resemblance is more than skin deep … though what a glowing complexion the real Red Gum wood veneer adds to any room!
REDGUM Splendens (Pre – Power) System
The more power it gives you, well, the more words fail us to describe the SPLENDENS! Except for the obvious >250W/ch (8Ω).
The clue is in its origins. Simply put, take the the RGM175 Monoblock System (175W/ch), upgrade it to the Signature Series RGM175ENR (200W/ch). And then let it quietly evolve over the years.
Having now morphed into the Splendens Monoblock Pre-Power System, it still brings together the the principles of the RG175p Dual Mono Volume Passive Preamp with two RG175ENRm Signature Series Monoblock Power Amplifiers. And then some.
So while you are finding the words for it in the music, watch out, too, for what the musicians are thinking as they play!!