REDGUM RGSW3

Subwoofer Plate Amplifier Module

 

Available as Special Order

 

For use in a separate chamber

Power Output -- 300Watt RMS @ 4ohms  (255Watt RMS @ 8ohms)

Damping Factor – Greater than 600

Signal to Noise – Output Stage >110db – Overall > 85db

Slew Rate – 35v/uS

Input Impedance - 10k Ohm

Input Sensitivity – 220mV for full output (factory adjustable from 100mV to 25V)

Frequency Response – (relative to 20Hz=0db) minus 3db points are 1Hz to 20 to 200Hz Adjustable

Electronic Xover – Variable 20-200Hz at slope 6db/octave

Plate finish – 1.2mm black powder coated aluminium

Dimensions – 250mm (9.8in)H x 300mm (6.75in)W x 110mm (3.75in)D

Weight approx 6 kg (15 lb) Nett

Suggested Load -- speakers with nominal rating of 4 or 8ohms -- 500Va transformer
(2 Ohms or less as special order)